5 Must-Have Features in a PERKINS Generator

Perkins is one of the first companies in the world to produce engine companies. Founded in , Perkins has an annual production capacity of nearly 400,000 engines. The engines produced with diesel and natural gas fuels have been widely promoted and applied in various industries due to their economical, reliability and durability advantages.

Check now

In order to enable our users to have a deeper understanding of our products, we now introduce the knowledge of Parkinson diesel generator maintenance.

1, the maintenance of the cooling system

The new unit of the Perkins diesel generator set should be filled with coolant before starting. When filling, the deflation valve of the upper cooling system of the engine should be opened, and the coolant should be slowly added to the engine from the water supply port of the radiator tank until there is no air bubble and then discharged from the vent valve. The coolant should be filled below the neck of the radiator tank and should not be overfilled. After filling, the deflation valve is closed and the door on the water filter mount is opened to allow the DCA4 additive to mix into the cooling system. The cooling liquid used in the cooling system should mainly consist of pure water, antifreeze and DCA4 additive. Each liter of coolant contains 50% pure water, 50% antifreeze and 0.5 unit DCA4 additive. The well-equipped coolant can be used all year round and can be used continuously for two years.

Pure water can be prevented from forming scale due to purification. Antifreeze refers to industrial ethylene glycol or propylene glycol, which can lower the freezing point of water and increase the boiling point of water. The concentration of antifreeze should be 40%. 68%, too high or too low concentration will affect the antifreeze ability of the coolant. In most climatic conditions, the recommended concentration of antifreeze is 50%, and the freezing point of the coolant can reach -33cC. The DCA4 additive forms a protective film on the inner surface of the water system to prevent cavitation and block deposits in the liner and body.

2, maintenance of the lubrication system

SH grade oil; when the ambient temperature is lower than -5°C, use 10W-30CF4, CG4, CF4/SG, or CG4/SH grade oil. B and C series engines must use CF4/SG or CG4/SH grade oil.

Perkins generators are renowned for their reliability, durability, and efficiency, making them an excellent choice for businesses across various industries. Selecting the right generator for your specific business needs can be a complex process, as it involves understanding power requirements, operational environments, and fuel efficiency. Choosing the right generator can ensure uninterrupted operations, minimize downtime, and offer cost-effective power solutions for your business.

How to Select the Right Perkins Generator for Your Business Needs

Consider these essential factors when choosing the right Perkins generator to meet your business needs.

1. Assessing Your Power Requirements

The first step in selecting a generator is determining the amount of power your business requires. This will depend on the size of your facility, the equipment you need to run, and the type of operations you perform.

Key Considerations:

• Total Load Calculation: Add up the total wattage of all the devices, machinery, and equipment that the generator will need to power. This includes lighting, computers, HVAC systems, manufacturing machines, and any other essential systems. It’s crucial to differentiate between peak and running power needs to avoid overloads during spikes in energy demand.

• Type of Load: Different types of equipment have different power requirements. Motors, compressors, and other heavy-duty equipment typically require more startup power (surge wattage), while lighting and computers may only need consistent running wattage.

• Single or Three-Phase Power: Depending on the nature of your business and the equipment you use, you may require either single-phase or three-phase power. Single-phase power is typically used in smaller businesses, whereas larger industrial operations often require three-phase generators for higher power efficiency.

Once you have a clear understanding of your business’s total power consumption, it becomes easier to determine the appropriate kVA rating (Kilovolt-Amperes) for your Perkins generator.

2. Choosing the Right Fuel Type

Perkins generators are available in a variety of fuel types, including diesel and natural gas. Each fuel type has its own advantages and potential drawbacks depending on your business location, operating costs, and environmental considerations.

Diesel Generators:

• Pros: Diesel-powered generators are known for their fuel efficiency and durability. Diesel engines tend to have a longer lifespan and lower maintenance costs compared to other fuel types. They are ideal for businesses that require high power output and extended running times.

• Cons: Diesel generators can be noisier and are subject to stricter environmental regulations due to their emissions. However, modern diesel generators, such as those offered by Perkins, come with advanced emission control systems to reduce their environmental impact.

Natural Gas Generators:

• Pros: Natural gas generators produce cleaner emissions than diesel and are generally quieter. They are an excellent choice for businesses with access to a natural gas supply, as this fuel is more cost-effective over time.

• Cons: Natural gas generators are typically more expensive upfront and may not be as fuel-efficient in situations where consistent, high-power output is required. Additionally, natural gas pipelines may not be available in all regions, limiting fuel supply in certain areas.

3. Understanding Generator Size and Capacity

When choosing a generator, the size and capacity are critical to ensuring it meets your power demands efficiently. Undersized generators can lead to frequent breakdowns and poor performance, while oversized generators can waste fuel and increase operational costs.

How to Determine the Right Size:

• Match the kVA to Your Power Needs: Once you’ve calculated your business’s power requirements, select a generator with the appropriate kVA rating. Perkins offers generators ranging from small 10 kVA units to large industrial generators exceeding kVA.

  For more information, please visit Huipu Power.

• Consider Future Expansion: It’s always a good idea to consider potential business growth. If you expect to add new machinery or expand operations in the near future, select a generator with extra capacity to accommodate these changes without overloading the system.

Sizing for Peak Loads:

• Factor in Start-Up Loads: Equipment with motors or compressors can require up to three times the power at startup compared to their running power. Ensure your generator has sufficient capacity to handle these surges without disrupting the overall power supply.

4. Maintenance and After-Sales Support

The longevity and reliability of your generator largely depend on how well it is maintained. Perkins generators are known for their ease of maintenance, but it’s important to have access to after-sales support, spare parts, and service centers.

Key Considerations:

• Warranty and Support: Ensure that the generator comes with a comprehensive warranty and access to authorized service centers. Perkins provides excellent global support and warranty services, making it easier to find parts and technicians for repairs and maintenance.

• Preventive Maintenance: Regularly scheduled maintenance is crucial to ensuring that your generator performs optimally over its lifespan. Perkins generators are designed for ease of maintenance, with features such as self-diagnostic systems and service alerts to help identify potential issues early.

5. Choosing the Right Location for Installation

Proper installation is key to ensuring the generator operates efficiently and safely. Location plays a critical role in the generator’s performance, especially when considering factors like ventilation, noise, and fuel access.

Indoor vs. Outdoor Installation:

• Outdoor Installation: Outdoor generators are more common, as they require less space inside your facility. However, outdoor installations must be protected from the elements, so consider adding weatherproof enclosures to safeguard the generator from rain, dust, and extreme temperatures.

• Indoor Installation: If space allows, indoor generators can be housed in dedicated rooms with proper ventilation and cooling systems. This option protects the generator from outdoor elements but requires additional investment in soundproofing and exhaust systems to manage heat and emissions.

Noise Levels:

Perkins generators are designed with noise reduction technologies, but larger generators can still generate significant noise, which could impact your business operations. Consider the generator’s decibel level and, if necessary, choose a model with additional soundproofing features or install the generator in a remote location to minimize disruption.

6. Cost and Budget Considerations

The cost of a generator is another critical factor in the decision-making process. While Perkins generators may have a higher upfront cost compared to lower-end alternatives, their reliability, fuel efficiency, and low maintenance costs make them a worthwhile long-term investment.

Initial Cost vs. Total Cost of Ownership:

• Initial Cost: This includes the generator itself, installation, and any additional components (e.g., automatic transfer switches, soundproof enclosures). Perkins offers a wide range of generators that vary in price depending on size, power capacity, and features.

• Total Cost of Ownership: Consider the generator’s fuel efficiency, maintenance requirements, and potential downtime. Perkins generators are known for their efficiency and longevity, meaning lower running costs and fewer repairs over time.

7. Compliance with Local Regulations

In Pakistan, it’s essential to ensure that your generator complies with local regulations and environmental standards. This is particularly important for diesel-powered generators, which are subject to emissions regulations.

Environmental Considerations:

• Emission Standards: Perkins generators are engineered to meet international emission standards, but it’s still important to check local laws to ensure compliance.

• Noise Pollution: Generators can produce significant noise, especially in residential or urban areas. Ensure your generator meets local noise pollution regulations by selecting models with advanced noise control features.

8. Selecting a Reliable Supplier

Finally, it’s essential to purchase your Perkins generator from a reliable and authorized dealer to ensure that you receive a genuine product, proper installation, and after-sales support.

Tips for Choosing a Supplier:

• Authorized Dealer: Choose a supplier who is an authorized Perkins dealer to ensure you receive genuine products with warranty protection.

• Installation Services: A professional installation is crucial to ensuring your generator operates correctly. Opt for a supplier who offers installation services and can provide ongoing maintenance.

• After-Sales Support: Ensure that the supplier offers after-sales support, including maintenance, repairs, and access to spare parts.

Conclusion

Choosing the right Perkins generator for your business requires careful consideration of power requirements, fuel type, size, and budget. With the right generator in place, your business will benefit from a reliable, efficient, and cost-effective power solution. Whether you’re looking for a diesel generator for heavy-duty applications or a natural gas generator for cleaner energy, Perkins offers a range of options to meet the needs of businesses in Pakistan. By working with a reputable supplier and ensuring proper maintenance, you can ensure that your Perkins generator provides uninterrupted power for years to come.

The company is the world’s best PERKINS Generator supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.