Why is 1.5 Ton Scissor Type Electric Reach Truck Better?

If you are looking for more details, kindly visit 1.5 Ton Scissor Type Electric Reach Truck.

A reach truck is a type of forklift, and it is one of the types of forklifts that we need to be familiar with and understand. It not only has a place in the forklift category, but also has specific requirements in the website products, which allows us to know different kinds of forklifts and enrich our knowledge.

 

1. The reach truck combines the characteristics of a counterbalanced forklift and an electric stacker, so it has some advantages in use. It has good operational flexibility and high load capacity. At the same time, its volume and weight will not increase a lot, which can effectively save the working space and improve the profit of the warehouse space

2. The lifting chain in the reach truck is very important. The lifting chain mainly plays the role of supporting the weight of the forklift and the cargo, and drives the forklift to lift. Therefore, it is an essential component. There are two specific types of lifting chains, the sheet type is suitable for large-tonnage forklifts, and the sleeve type is suitable for small and medium-sized forklifts.

3. There are some differences between stand-on reach forklifts and ride-on reach forklifts. The stand-up reach forklift has the advantages of no pollution, low noise and high energy conversion rate, and is suitable for high-level operation in a limited space. The ride-on reach forklift is supported by three fulcrums, with two support wheels on the left and right in the front for loading, and one support wheel in the rear for driving and steering. However, in terms of stability, ride-on reach trucks are slightly inferior to stand-on reach trucks.

To sum up, there is a certain difference between the stand-on reach forklift and the ride-on reach forklift, which cannot be confused, so as not to cause unnecessary problems or troubles and affect the normal use and effect of the forklift.

1.5T Double Scissor Fork Electric Reach Truck Forklift

Parameter

  

Model

 

CQDH15C(single scissor)

CQDH15C(double scissor)

Drive type

 

Battery                 Battery

Battery                 Battery

Battery                 Battery

Load capacity/rated load

Q(kg)

1500                   1500

1500                   1500

1000                   1000

Load centre distance

c(mm)

500                    500

500                    500

500                     500

Load distance,centre of drive axle fork

X(mm)

334                     309

246                     246

159                    135

Tyre size,front

mm

280x100+160x60     280x100+160x60

280x100+160x60x2 280x100+160x60x2

280x100+160x60     280x100+160x60

Tyre size,rear

mm

   125x82(4)            125x82(4)

125x82x4              125x82x4

125x82x(4)            125x82x(4)

Wheels,number front rear (x=driven wheels)

 

1+2                    1+2

1x+2/4                 1x+2/4

1+2                    1+2

Tilt of mast(fork carriage forward/backward)

grad

2/5                     2/5

2/5                     2/5

2/5                     2/5

Height,mast lowered

h

1

(mm)

2125 2375 2625   2185 2345 2505 2675

2125 2375 2625  2185 2345 2505 2675 2840

2125 2375 2625  2185 2345 2505 2675

Free lift

h

2

(mm)

                 1575 1700 1825 2000

                 1776 1776 2010 2080 2240

                 1575 1700 1825 2000

Max,lift height

h

3

(mm)

3000 3500 4000   4500 5000 5500 6000

3000 3500 4000  4500 5000 5500 6000 6500

3000 3500 4000  4500 5000 5500 6000

Height,mast extended

h

4

(mm)

3881 4381 4881   5381 5881 6381 6881

3900 4400 4900  5400 5900 6400 6900 7400

4035 4535 5035  5535 6035 6535 7035

Height of overhead guard

h

6

(mm)

2246                2246

2246                   2246

2246                   2246

Overall width

b

1

/b

2

(mm)

1310/1040           1310-1400/1040

1295/1040             1295/1040

1308/1040      1308/1040  1370/1040

Overall length

I

1

(mm)

2409                 2435

2615                   2616

2585                  2609

Length to face of forks

I

2

(mm)

1339                 1365

1518                   1518

1515                  1539

Fork dimension

s/e/l(mm)

35/100/1070           35/100/1070

35/100/1070             35/100/1070

35/100/1070       35/100/1070

Reach distance

I

For more hulk-forkliftinformation, please contact us. We will provide professional answers.

4

(mm)

500                   500

500                      500

1200                  1200

Fork height,lowered

h

8

(mm)

  35                     35

  35                       35

35                     35

Distance of "X"(see below diagram)

mm

  450                   450

450                   450

350                    350

Overall length(excluding the fork)

mm

  1868                  1868

  1868                  1868

1868                 1868

Ground clearance,centre of wheelbase

m

2

(mm)

  65                      65

  49                     49

65                    65

Aisle width for pallets1000x1200 crossways

A

st

(mm)

 2814                   2839

  2956                  2956

2951                 2971

Aisle width for pallets800x1200 lengthways

A

st

(mm)

 2871                   2902

  3027                  3027

3034                3056

Turning radius

W

a

(mm)

 1718                  1718

1791                  1791

1718                 1718

Travel speed,laden/unladen

Km/h

6.5/7                   6.5/7

6.5/7                  6.5/7

6.5/7                 6.5/7

Lift speed,laden/unladen

m/s

0.135/0.16              0.135/0.16

 0.27/0.4

3                        

0.27/0.4

3

0.135/0.16           0.135/0.16

Lowering speed,laden/unladen

m/s

0.15/0.12               0.15/0.12

0.45/0.36

4                       

0.45/0.36

4

0.15/0.12            0.15/0.12

Battery voltage,nominal capacity K5

V/Ah

24/420(560)            24/420(560)

36/700                 36/700

24/420(560)          24/420(560)

Battery weight

kg

340/425                340/425

810                     810

340/425              340/425

Battery dimension l/w/h

mm

780x335x500(620)   780x335x500(620)

978x395x765              978x395x765

780x335x500(620)   780x335x500(620)

Service weight(with battery)

kg

2450 2500 2560   2700 2800 2900 3000

3130 3180 3230  3370 3470 3570 3670 3770

2480 2530 2590   2730 2830 2930 3030

Design Drawing

MOVMES has the professional design team.While reducing costs, we are committed to every small features to improve work efficiency, reduction of safety risks for employee and improve customer utilization.

Advantages:

SAFETY AND STABILITY
Advanced AC control system eliminating the motor brushes and directional contactor,which makes the minimal maintenance requirements.
Stepless speed control intelligentized regenerative brake system :increase overall truck performance by decreasing battery charge intervals.
Equipped with adjustable hand-rest.adapted to different operator.
Multi-function display:battery status,hour meter,fault indicator etc.
Two sides-way battery with roll-out system is very convenient to replace batteries.
Damping cushion for low-noise operation.
Built-in pressure relief valve protects the trucks from overloads.
Emergency power disconnect.

STRUCTURAL
Low center of gravity ensures the stable operation.
Vertical driving wheel has a small turning radius and easy to maintain.The motor structure is water-proof and dust-proof.
The scissor reach forks is operated by electric controller,which makes operation stable and no impact.

SERVICEABILITY
Low battery protection setting prolongs the battery use time.
CANbus technology reduces wiring complexity and increase reliability.
All pivot pointshave grease fitting and serviceable bushing,reducing component wear and extending component life.
The back cover is easy to open for maintenance and adjustment of parts of valve,oil tube and electronic parts.

Option:
Straddle legs
Double scissors
Double front wheels
Full free lift masts
Side shift
 

Customer Feedback

Certification:

ISO9002:1995

ISO9001:2008(Quality management system)

ISO14001:2004(Environmental management system)

OHSAS18001:2007(Occupational Health and Safety management system)

We got TUV/GS/CE certificate for hand pallet truck early in 1991,who was the first manufacture in China.For material handling equipment of Manual Lift Trucks and Electric Lifting Trucks,up to 90% products have approved CE certificate from TUV,our products have approved CE standards of EN3691-5:2014 and EN3691-1:2012

Prodection Process

36 year

'

s experience

8 international approvals

150,000m2 factory area

1,200 employees

188 professional mechanical technicians

77 senior engineers

500 types warehouse equipment

157 countries and regions exported to

Tesing System

Product test before delivery:

Total five test items:

1.Strengthening test detection

2.Stability detection

3.Detection of climbing performance and current

4.Debugging and testing of braking performance

5.Testing of technical parameters

Strong Packing

MOVMES according to the delivery requirements of each customer, we carefully package each TRUCK. Before delivery, we will take photos and videos, and only after getting the customer's approval will we send them away.

Usually MOVMES producing time is 15- 20 days after we receive the advanced payment. For some standard products, we may have stock and could delivery immediately.

FAQ:

Q1: How about the continuous working time for the electric truck series ? And How long time to charge the battery full ?

A1: MOVMES battery continuous working time is around 3-6 hours (working time depend on battery volume).It needs usually 3--6 hours to charge the battery.

 

Q2: What's the specification of the chargers?

A2: Our chargers voltage could be 24V /48V ,Side-way battery with roll-out system is very convenient replacement. Power plug could be USA/UK/AUSTRALIA/EUPROPEAN standard.

 

Q3: Can MOVMES provide customized products? OEM or ODM products?

A3: Yes, Since 1985,MOVMES is always professionally in developing and producing warehouse logistic equipment ,such as manual/electric pallet trucks&slackers, reach trucks, forklifts and so on.We do OEM for Toyota/ Jungheinrich/ Clark / Hyster / Yale etc.

 

Q4: How long is the Warranty for MOVMES product?

A4: MOVMES provides one year warranty.During the warranty period we provide wearing parts for free which are damaged by non-human.

Want more information on 1.6ton 1.8ton 2ton 3 wheel electric forklift? Feel free to contact us.