Non-Explosive Demolition - All You Need To Know

You do not need explosives for every demolition job. Most people assume that for a demolition to be a demolition there is a need for a kaboom. It does not have to be that way. As a leading demolition contractor in we are experts of non-explosive concrete demolition.

If you want to learn more, please visit our website Sanqiang Building Material.

Non-explosive concrete demolition is a process that relies on chemical agents to safety remove concrete and rock during the demolition process.

This is a viable alternative to explosives especially in situations where there is a high risk of injury posed by explosives or where vibrations caused by explosives could damage nearby structures.

The advantages of non-explosive concrete demolition are:

• The process is silent
• They are safer than explosives
• It’s an environmentally friendly process
• They lower costs and reduces the insurance premiums on projects
• You don’t have to go through the process of acquiring blasting permits
• You can remove concrete slabs and reuse them for other purposes with minimal damage.

There are chemical agents that we use like buster or we use hydrodemolition to carry out the job. Both these methods offer you versatility and options that you do not get when you are using traditional methods like jackhammers and explosives.

This is just an example of why you should consider Manchester Demolition for your projects. We are committed to making sure that people and the environment do not suffer from the effects of demolition.

② Storage

Up to 1 year in accordance with manufacturer’s instructions for use. Store in cool, dry conditions as for cement. If the outter bag is open, push the air out of the bag and seal it with tape. Use it as soon as possible. Keep out of reach of children.

Recommended article:
4 Advice to Choose a Sodium Formate Granule

For more Expansive Mortar Cracking Powderinformation, please contact us. We will provide professional answers.

④ Caution

● When mixing and filling holes always wear rubber gloves, safety glasses and helmet.

● Do not use for other purposes besides the cracking of rocks or concrete.

● Rinse with water when any portion of the skin comes into contact with high range soundless cracking agent

● Do not look directly into holes filled with high range soundless cracking agent for at least 8 hours after pouring.

⑤ Health and Safety

For full information on Health and Safety matters regarding this product the relevant Health and Safety Data Sheet should be consulted.

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs, (which may also be tainted with vapour until the product is fully cured and dried). Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Keep away from children and animals.